| 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 <2018> 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 <2018> 2019 2020 2021 2022 2023 2024 |
| <== Date ==> | <== Thread ==> |
|---|
| Subject: | Controling a slit system with 2 hard and 4 soft motorrs |
| From: | Torsten Bögershausen <[email protected]> |
| To: | "[email protected]" <[email protected]> |
| Date: | Thu, 8 Mar 2018 17:40:14 +0100 |
Hej motorists, I recently learned about the transform record, which can be used to control a slit with 2 physical axes in the way that you can set the values for GAP and CENTER and the position of the physical blades are calculated. (Or vice versa) Does anybody have a super-duper-luxus template file which uses 4 soft motors together with some calc and transform records ? Thanks in advance /Torsten