1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 <2018> 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 <2018> 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | StreamDevice with Telnet port |
From: | "Abdalla Ahmad" <[email protected]> |
To: | "[email protected]" <[email protected]> |
Date: | Sun, 11 Mar 2018 12:54:48 +0000 |
Hi We have the Gamma QPC ion-pump controllers controlled via StreamDevice through telnet, port 23. We have 4 parameters implemented, pressure, voltage, current, and channel status. The
problem is that the IOC gives an error that the value received for the pressure PV is "Running", i.e. "Input Running does not match format %E". Seems like at some point the controller is not finishing a previous parameter and the IOC receives something different
than the current parameter requested. We have the following in the protocol file:
OutTerminator = CR; InTerminator = CR; ReadTimeout = 2000; ReplyTimeout = 2000; And each parameter in the protocol file has
ExtraInput = Ignore at the end. Any help resolving this mismatching issue? Best Regards, Abdalla Ahmad Control Engineer SESAME Allan, Jordan. Tel: (+962-5) 3511348 , ext. 265 Fax: (+962-5) 3511423 Mob: (+962-7)88183296 |