| 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 <2018> 2019 2020 2021 2022 2023 2024 2025 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 <2018> 2019 2020 2021 2022 2023 2024 2025 |
| <== Date ==> | <== Thread ==> |
|---|
| Subject: | Re: driver support for Gamma Vacuum QPC 4 |
| From: | "Martin L. Smith" <[email protected]> |
| To: | <[email protected]> |
| Date: | Tue, 10 Apr 2018 05:48:41 -0500 |
At APS I have one QPCe running in production now and the EPICS driver mostly works ... at least I have readbacks. There are very few issues that I have not had the time to work on or test just yet. All readbacks work but I have not been able to test the setpoint readback and settings yet or the high voltage on/off. It has been difficult for me to get my hands on one of these and even more difficult to get a ion pump connected to a test unit for reasons out of my control. I was going to have it included in the synApps vacApp so that the driver would work with all other ion pumps as well. I would be happy to send the code to anyone that would like to try it out. Marty On 04/10/2018 05:01 AM, Jack wrote:
Does anyone use Gamma Vacuum QPC 4 vacuum pump controller ?
Thank you
--
Mauro Giacchini
--
Mauro Giacchini
Control System Specialist ISTITUTO NAZIONALE DI FISICA NUCLEARE
p/f: 0039.049.80.68.558 a: Viale universita' 2, 35020 Legnaro, PD -ITALY-
e: [email protected] <mailto:[email protected]> s: yakman000
--------------------------------------------------------------------------------
Avast logo <https://www.avast.com/antivirus>
Questa e-mail è stata controllata per individuare virus con Avast antivirus.
www.avast.com <https://www.avast.com/antivirus>
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>