1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 <2018> 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 <2018> 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | RE: Problem with autosave module making it crash at random basis. |
From: | "Abdalla Ahmad" <[email protected]> |
To: | "Mooney, Tim M." <[email protected]>, "Konrad, Martin" <[email protected]>, "[email protected]" <[email protected]> |
Date: | Tue, 17 Apr 2018 08:47:10 +0000 |
Thank you for your suggestions The problem is that the crash happens on a random basis, no specified time or event. What makes it worse is that the same IOC sometimes crash due to an issue
in the SNMP driver. Right now I am waiting for the IOC to crash to see if there could be a core dump file and run Mark's instructions in a previous thread. After that I will try
the latest version. If the problem persists I will run the IOC in a procServ process and postpone this issue. Thank you very much! Abdalla. From: Mooney, Tim M. [mailto:[email protected]]
Hi Abdalla, Have you tried running a more recent version of autosave? Since the version tagged "synApps_5_6" (which is also tagged R4-8), I found a string buffer being overrun, and went through systematically, replacing strcpy with strncpy, strcat with strncat, and sprintf with snprintf. You could rule buffer overrun out as a cause by running R5-6-2 or later. Tim Mooney ([email protected]) (630)252-5417 From:
[email protected] <[email protected]> on behalf of Konrad, Martin <[email protected]> Hi Abdalla, |