1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 <2018> 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 <2018> 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Re: Smaract MCS2 Motor Record |
From: | "Lentz, Zachary L" <[email protected]> |
To: | "Sobhani, Bayan" <[email protected]>, "[email protected]" <[email protected]> |
Date: | Thu, 10 May 2018 22:18:00 +0000 |
Hi Alex,
This looks promising, thank you for sharing. A couple of questions:
-Zachary From: Sobhani, Bayan <[email protected]>
Sent: Thursday, May 10, 2018 6:39:22 AM To: Lentz, Zachary L; [email protected] Subject: RE: Smaract MCS2 Motor Record Hi Zachary,
Yes, we have an MCS2 IOC that we have been using without issue for the last few months at NSLS2:
SmarAct MCS2 IOC: https://github.com/bsobhani/smaract-mcs2 SmarAct MCS2 Motor Record: https://github.com/bsobhani/motor-mcs2
So far it has been tested on Debian 8 machines. Let me know if you run into any problems.
Alex
From: [email protected] <[email protected]>
On Behalf Of Lentz, Zachary L
Is anyone developing motor record support for the SmarAct MCS2 controller? It unfortunately has a completely different command set than their previous MCS controller. We're looking to use these for some projects at SLAC.
Thanks, Zachary Lentz |