Re: Amptek IOC: Problem with subnet

[Douglas Henrique C. de Araújo <douglas.araujo@lnls.br>]

Hi Hugo,

Now I'm doing test in my local pc with IP 10.2.101.36 and the detector is connected in 10.2.103.31. in this case the ioc can't find the detector. We already configured the broadcast, but not has changed.

When I connect the detector in other port (10.2.101.34) the ioc works.

Another important point is that when we connected the detector in beamline network (subnet: 10.2.78.0) and we used the DppMCA Windows program (Running a windows pc on the subnet: 10.2.76.0), the DppMCA recognizes the detector.

Thank You
Regards

Em 16-05-2018 15:49, Hugo Slepicka escreveu:

Hi Douglas,

Can you provide more information about the IOC server network and also the detector network? (IP, Network Mask, Gateway, etc)...

Thank you,

Hugo

On Wed, May 16, 2018 at 10:51 AM Douglas Henrique C. de Araújo <douglas.araujo@lnls.br> wrote:

Hi, I'm using the amptek ioc from support mca7-7, and if the detector is
on the same network (and subnet) as the IOC server, it recognizes and
works perfectly. But if I change the detector subnet, the ioc can't find
the detector.

Does anyone knows if there is some configuration so that the amptek IOC
recognizes the detector that is connected in another subnet? Or has 
anyone had a similar problem?

Thank you

--
Douglas Henrique C. de Araujo
Software de Operação das Linhas de Luz
Laboratório Nacional de Luz Síncrotron – (LNLS)
Centro Nacional de Pesquisa em Energia e Materiais (CNPEM)
douglas.araujo@lnls.br | +55 (19) 3512 1228
www.lnls.br

-- 
Douglas Henrique C. de Araujo
Software de Operação das Linhas de Luz
Laboratório Nacional de Luz Síncrotron – (LNLS)
Centro Nacional de Pesquisa em Energia e Materiais (CNPEM)
douglas.araujo@lnls.br | +55 (19) 3512 1228
www.lnls.br