EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  <20182019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  <20182019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: Transfering array of 256 elements to driver
From: Jörn Dreyer <[email protected]>
To: [email protected]
Date: Thu, 31 May 2018 14:48:33 +0200
Hello,

I'm working on a driver that needs to set 256 values into one hardware 
register. What type of database record should I use for this purpose?

The waveform record supports only INP direction.

Regards,

Jörn Dreyer



Replies:
RE: Transfering array of 256 elements to driver [email protected]

Navigate by Date:
Prev: Reminder: EPICS Meeting Registration Andrew Johnson
Next: RE: Transfering array of 256 elements to driver [email protected]
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  <20182019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Reminder: EPICS Meeting Registration Andrew Johnson
Next: RE: Transfering array of 256 elements to driver [email protected]
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  <20182019  2020  2021  2022  2023  2024