Hi all,
I would like to output an interlock signal if any of the temperature values exceeds the my set value.
I am thinking to make it in the following way.
-----------------------------------------------------------------------------------
Read temperature value(ai)->Temperature interlock Calc->Interlock signal(bo)
-----------------------------------------------------------------------------------
The problem is that I do not know how to calculate because there are many read temperature value.
The calculation record consists of 12 input links (INPA, INPB, ... INPL), but the number of my temperature values is over 70.
How do I configure a calcout record?
Please let me know if you have a better idea to configure the temperature interlock.
Thanks in advance
------------------------