1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 <2018> 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 <2018> 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | OXCS N-Helix communication |
From: | Allan Serra Braga Bugyi <[email protected]> |
To: | "[email protected]" <[email protected]> |
Date: | Fri, 31 Aug 2018 13:03:52 +0000 |
Hello everybody,
On July I've asked here if anyone had a device suppport for N-Helix, and I got many responses of already implemented support. At this time, I'm trying to establish communication with N-Helix using AsynDriver, through
ethernet interface. We've run some tests here, and N-Helix wasn't able to get a dynamic IP address from the DHCP server. I've tried to set the IP statically and I've used a crossover cable, but it didn't work too. I've suspected that N-Helix was rejecting
any incoming connection, and I've used 'nmap' command to map its ports, which seem to be all blocked (filtered, it says). So, am I right to think that N-Helix is not configured to accept any communication, either by TCP or UDP protocols?
Any help and work around is welcome.
Thank you,
Allan S. B. Bugyi Technology Development Analyst [email protected] (+55 19) 3512-3520 SOL/Beamline Software Group Brazilian Synchrotron Light Laboratory (LNLS) Center of Research in Energy and Materials (CNPEM) http://lnls.cnpem.br |