1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 <2018> 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 <2018> 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | ADMythen --acquisition issues |
From: | zhaoying via Tech-talk <[email protected]> |
To: | <[email protected]> |
Date: | Fri, 30 Nov 2018 09:28:43 +0800 |
Hello, J. Sullivan: We have a customized DCS6 (Detector control system for up to 6 detector modules ) with 5 Dextris Mythen detector modules. We are using ADMythen module to control those 5 Detectors. The result is as follows. Figure 1.Read back results It can be seen the controlling part works well, but the read back data is all 0 which is not reasonable. We tried to print the debug. The result is like figure 2. It can be seen “nread” never equals “nread_expected”. So we believe it happens in “acquisition” parts (from line 853 to line 947). But we have not find the actual line. Any suggestions? Thank you! ---Ying |