1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 <2019> 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 <2019> 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Re: EPICS CSS with OPC UA |
From: | Abhijit Bhopale via Tech-talk <[email protected]> |
To: | Ralph Lange <[email protected]> |
Cc: | EPICS Tech Talk <[email protected]> |
Date: | Wed, 30 Jan 2019 18:51:08 +0530 |
Hi Abhay,What requirement is it that doesn't allow you to use Channel Access?Cheers,
~RalphOn Wed, 30 Jan 2019 at 12:56, Abhijit Bhopale via Tech-talk <[email protected]> wrote:Hi Team,I am using EPICS OPI(Operator Interface) and the PVs on GUI are updated by channel access protocol used IOCs.Due to some security requirement currently, we won't be able to continue using channel access protocol.Is it feasible If I replace all the IOCs with OPC UA server but want to continue with same Operator OPI?So in general OPI will get all the PV updates from the protocol supported by OUC UA and not Channel Access. (In this approach the IOC PV name and OPC UA tag name will be same)Anyone have ever tried this? What can I do to achieve this?Any suggestions/solution approaches are welcome.Best Regards,Abhay