| 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 <2019> 2020 2021 2022 2023 2024 2025 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 <2019> 2020 2021 2022 2023 2024 2025 |
| <== Date ==> | <== Thread ==> |
|---|
| Subject: | Re: Request for information |
| From: | "Mooney, Tim M. via Tech-talk" <[email protected]> |
| To: | tech-talk <[email protected]>, "Sinclair, John William" <[email protected]> |
| Date: | Tue, 30 Jul 2019 18:22:40 +0000 |
|
Hi John,
I haven't studied the manual in too much detail, but this device looks like it can be run by software intended for the Keysight 33600 waveform generator, for which we coded the attached database when it was an Agilent product. This probably doesn't do what
you want, but it might be of some use anyway.
Tim Mooney ([email protected]) (630)252-5417
Beamline Controls Group (www.aps.anl.gov) Advanced Photon Source, Argonne National Lab From: [email protected] <[email protected]> on behalf of Sinclair, John William via Tech-talk <[email protected]>
Sent: Tuesday, July 30, 2019 12:41 PM To: tech-talk <[email protected]> Subject: Request for information Hi all,
I am soliciting comments related to positive or negative experience communicating with a Keysight E8663D signal gererator. The devices talks SCPI over GPIB, RS232, and ethernet.
If anyone has develop a set of stream-device commands for community use, I would be very grateful if I could obtain a copy.
Thanks, John Sinclair SNS
|
Attachment:
Agilent_33600A.db
Description: Agilent_33600A.db