1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 <2019> 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 <2019> 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Phoebus Radiobutton cannot set mbbi record |
From: | Florian Feldbauer via Tech-talk <[email protected]> |
To: | "[email protected]" <[email protected]> |
Date: | Mon, 12 Aug 2019 08:40:05 +0200 |
Hey all,in a test setup I'm currently using base 7.0.2.2 and Phoebus (commit ff6d0dc4).
Now I have some bi and mbbi records like this:
record( mbbi, "PANDA:LMD:MUPIX:TELESCOPE:L$(LAYER):ToT" ) { field( DTYP, "Raw Soft Channel") field( ZRST, "ToT" ) field( ONST, "2Thres" ) field( TWST, "Ramp") field( ZRVL, "0" ) field( ONVL, "2" ) field( TWVL, "1" ) } record( bi, "PANDA:LMD:MUPIX:TELESCOPE:L$(LAYER):bandgap1" ) { field( ZNAM, "disabled" ) field( ONAM, "active" ) }
For the mbbi record I'm using the Radiobutton widget and for the bi the checkbox widget.
I tried CA as well as PVaccess (PV name "PANDA:..." and "pva://PANDA:...)In both cases I cannot change the value of the records. The checkbox only works if I explicitly append ".RVAL" to the PV name. The Radiobutton does nothing. Is this behavior expected or am I doing something wrong?
Best regards, Florian -- Dr. Florian Feldbauer Ruhr-Universität Bochum Experimentalphysik I AG Universitätsstr. 150 Fach-Nr. 125 D-44801 Bochum Office: NB 2/134 Phone: (+49)234 / 32-23563 Fax: (+49)234 / 32-14170 https://paluma.ruhr-uni-bochum.de