Re: pco Camera USB and IEEE interface

["Bradnick, Ben \(Tessella, RAL, TEC\) via Tech-talk" <tech-talk@aps.anl.gov>]

Hi Michael,

We have only used ADPcoWin at Diamond with CameraLink and CameraLink HS interfaces. In principle it should work with other interfaces but it may require building the support module against additional libraries from the PCO SDK.

If you have any issues with getting it working you can raise an issue on GitHub and I can investigate.

Kind regards,

Ben

---

From: Tech-talk <tech-talk-bounces@aps.anl.gov> on behalf of Sintschuk, Michael via Tech-talk <tech-talk@aps.anl.gov>
Sent: 11 December 2019 09:01
To: Mark Rivers <rivers@cars.uchicago.edu>
Cc: tech-talk@aps.anl.gov <tech-talk@aps.anl.gov>
Subject: AW: pco Camera USB and IEEE interface

 

Hey Mark, hey Diego,

thanks for the help! I try the ADPcoWin driver. On github it says that the interface is CameraLink:

https://github.com/areaDetector/ADPcoWin

But if you say it works with any interface (what about IEEE only?), I will try it on a Windows7 64bit system.

Michael

---

Von: Mark Rivers <rivers@cars.uchicago.edu>
Gesendet: Dienstag, 10. Dezember 2019 19:42:53
An: Sintschuk, Michael
Cc: tech-talk@aps.anl.gov
Betreff: Re: pco Camera USB and IEEE interface

 

Another possibility is the ADPcoWin driver. This driver uses the PCO SDK so it should work with any camera interface, GigE or CameraLink. It only runs on Windows.

Mark


Sent from my iPhone

On Dec 10, 2019, at 2:38 AM, Sintschuk, Michael via Tech-talk <tech-talk@aps.anl.gov<mailto:tech-talk@aps.anl.gov>> wrote:

Hello,

I have a pco.1600 camera with a USB/Ethernet interface and a pco.4000 camera with a IEEE interface. Is there a possibility for me to communicate with these cameras via an IOC?
The AreaDetector Driver I found is intended for Cameralink-based communication:
https://github.com/areaDetector/ADPCO

Best regards
Michael Sintschuk


Michael Sintschuk
Bundesanstalt f?r Materialforschung und -pr?fung (BAM)

P: +49 30 8104-5736 (BESSY, Adlershof)
P: +49 30 8104-4065 (BAM, Lichterfelde)
michael.sintschuk@bam.de<mailto:michael.sintschuk@bam.de>

 

-- 

This e-mail and any attachments may contain confidential, copyright and or privileged material, and are for the use of the intended addressee only. If you are not the intended addressee or an authorised recipient of the addressee please notify us of receipt by returning the e-mail and do not use, copy, retain, distribute or disclose the information in or attached to the e-mail.
Any opinions expressed within this e-mail are those of the individual and not necessarily of Diamond Light Source Ltd.
Diamond Light Source Ltd. cannot guarantee that this e-mail or any attachments are free from viruses and we cannot accept liability for any damage which you may sustain as a result of software viruses which may be transmitted in or with the message.
Diamond Light Source Limited (company no. 4375679). Registered in England and Wales with its registered office at Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom