Re: Support for Cryocon 22C

["Cobb, Tom \(DLSLtd,RAL,LSCI\) via Tech-talk" <tech-talk at aps.anl.gov>]

Hi Mark,

I'm not sure of the history of the modules, but I found support for both the M14 and the M32 in our repositories and pushed them to github:

https://github.com/dls-controls/CryoconM14

https://github.com/dls-controls/CryoconM32

Thanks,

Tom

---

From: Tech-talk <tech-talk-bounces at aps.anl.gov> on behalf of Mark Rivers via Tech-talk <tech-talk at aps.anl.gov>
Sent: 26 February 2020 23:50
To: tech-talk <tech-talk at aps.anl.gov>
Subject: Support for Cryocon 22C

 

Does anyone have EPICS support for the Cryocon 22C temperature controller?

 

Some of their more advanced units have an EPICS server built-in, but the 22C does not.

 

I see Pete Owens at Diamond listed as having StreamDevice support for the model 14.  The model 14 StreamDevice support would probably be a good place to start if the 22C is not directly supported.  It that on Github?

 

Thanks,

Mark

 

 

 

-- 

This e-mail and any attachments may contain confidential, copyright and or privileged material, and are for the use of the intended addressee only. If you are not the intended addressee or an authorised recipient of the addressee please notify us of receipt by returning the e-mail and do not use, copy, retain, distribute or disclose the information in or attached to the e-mail.
Any opinions expressed within this e-mail are those of the individual and not necessarily of Diamond Light Source Ltd.
Diamond Light Source Ltd. cannot guarantee that this e-mail or any attachments are free from viruses and we cannot accept liability for any damage which you may sustain as a result of software viruses which may be transmitted in or with the message.
Diamond Light Source Limited (company no. 4375679). Registered in England and Wales with its registered office at Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom