1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 <2020> 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 <2020> 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Filtering messages print on the IOC shell console |
From: | "Paduan Donadio, Marcio via Tech-talk" <tech-talk at aps.anl.gov> |
To: | Ben Franksen via Tech-talk <tech-talk at aps.anl.gov> |
Date: | Thu, 26 Mar 2020 19:57:29 +0000 |
We have some modules at SLAC that print tons of messages on the console when something gets wrong. When implemented through Asyn or Stream Device there are ways to reduce or cut off the messages, but some
modules implement everything with printf or errLogPrintf. It is a long shot, but do you think that there is a way to modify the IOC shell layer to verify a message before it is printed, even when printf is used? Or, did anyone have a better idea other than to modify every module, changing printf and errLogPrintf to something else? Thank you, Márcio Paduan Donadio – Control Systems Engineer SLAC – Stanford Linear Accelerator Center |