1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 <2020> 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 <2020> 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Has anyone written an IOC for control of (PI)Acton spectrometers? |
From: | "Heesterman, Peter J via Tech-talk" <tech-talk at aps.anl.gov> |
To: | EPICS Tech-Talk <tech-talk at aps.anl.gov> |
Date: | Fri, 11 Sep 2020 15:53:49 +0000 |
Hi, If the answer is no, I will be likely to write one. I note this question touches on the discussion at
https://epics.anl.gov/tech-talk/2019/msg00470.php. I’m aware that
ADLightField could be used to operate both Princeton cameras, and Acton spectrometers. But we often use the spectrometer with cameras other than Princeton - and would prefer to use the ADPICam camera driver, if we are. Many thanks, Peter. Peter Heesterman Software Engineer CODAS & IT Providing services on behalf of United Kingdom Atomic Energy Authority Culham Science Centre, Abingdon, OX14 3DB, UK Tel. +44 1235 465157 Email:
Peter.Heesterman at UKAEA.uk Section mail address:
PCDatanet-Support at ukaeauk.onmicrosoft.com The content of this email is confidential and intended for the recipient specified in the message only. It
is forbidden to share any part of this message with any third party, without the written consent of the sender. If you received this message by mistake, please reply to this message and then delete it, so that we can ensure it does not occur in the future. |