1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 <2020> 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 <2020> 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | ADEiger Status Parameters Polling |
From: | John Dobbins via Tech-talk <tech-talk at aps.anl.gov> |
To: | "tech-talk at aps.anl.gov" <tech-talk at aps.anl.gov> |
Date: | Thu, 5 Nov 2020 18:48:27 +0000 |
The ADEiger documentation reads:
"Status Parameters Polling
A few status parameters are read every time the ReadStatus PV is processed. A high rate polling causes issues, sometimes causing the detector to hang when, in conjunction, a parameter is set to an invalid value."
Can someone say what a "high rate" would be? 0.1 Hz, 1 Hz, 10 Hz? Other?
Thanks,
John Dobbins
Research Support Specialist
Cornell High Energy Synchrotron Source
Cornell University
|