RE: Huber SMC 9300 controller

["Oram, Dominic \(STFC,RAL,ISIS\) via Tech-talk" <tech-talk at aps.anl.gov>]

Hello Dongliang,

 

We would also like to control a Huber SMC9000 series. Did you find any device support for it? It seems LNLS may have been working on the same thing (https://epics.anl.gov/tech-talk/2017/msg01534.php)

 

We would be happy to write support ourselves if there isn’t any already.

 

Dom

 

Senior Software Engineer

ISIS Neutron and Muon Source

 

From: Tech-talk <tech-talk-bounces at aps.anl.gov> On Behalf Of yangdl via Tech-talk
Sent: 13 March 2020 02:14
To: tech-talk at aps.anl.gov
Subject: Huber SMC 9300 controller

 

Hi,

 

I'm new to EPICS and trying to use EPICS to control the Huber SMC9300 motor controller.

Does anybody have an EPICS driver support for the Huber SMC9300.

 

Could you give me any advice?

 

Thanks,

Dongliang

 

 

This email and any attachments are intended solely for the use of the named recipients. If you are not the intended recipient you must not use, disclose, copy or distribute this email or any of its attachments and should notify the sender immediately and delete this email from your system. UK Research and Innovation (UKRI) has taken every reasonable precaution to minimise risk of this email or any attachments containing viruses or malware but the recipient should carry out its own virus and malware checks before opening the attachments. UKRI does not accept any liability for any losses or damages which the recipient may sustain due to presence of any viruses. Opinions, conclusions or other information in this message and attachments that are not related directly to UKRI business are solely those of the author and do not represent the views of UKRI.