1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 <2021> 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 <2021> 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | CS-Studio (Phoebus) Dynamic Population of PVs in GUI |
From: | "Manoussakis, Adamandios via Tech-talk" <tech-talk at aps.anl.gov> |
To: | EPICS tech-talk <tech-talk at aps.anl.gov> |
Date: | Thu, 14 Jan 2021 22:28:34 +0000 |
Hello All, I was curious what the best way to go about populating our GUIs in CS Studio when we are dealing with multiple PVs that share a common attributes. Such as Device1:Subdevice1:Signal1 Device1:Subdevice1:Signal2 Device1:Subdevice2:Signal1 Device1:Subdevice2:Signal2 And so forth for N devices M Subdevices Z Signals I was thinking to use macros that pull from drop down menus which would then populate the correct PVs for say specific waveforms. Dropdown menu to select Device #, Dropdown menu to select subdevice # and then populate the PV waveforms for the correct subset I selected.
I only just started to use CS Studio and I think this seems possible but wasn’t completely sure. I also saw that I could write some python scripting and have it run in CS Studio to parse out and place the correct PVs depending on drop
down selections but wanted to check in first and see how people have been using it. Thanks |