Experimental Physics and Industrial Control System
On 1/26/21 2:42 AM, Abdalla Ahmad via Tech-talk wrote:
> Hi
>
>
>
> I came across this module https://github.com/epics-modules/mrfioc2 <https://github.com/epics-modules/mrfioc2> when searching for a driver for MRM-based timing system hardware. Looking at the source code it does not seem to work with Ethernet connected hardware, only VME. Our timing system hardware is inserted into a VME chassis but connected to the control system via the board’s Ethernet interface.
> Can this driver be configured to connect to Ethernet-connected hardware?
No, only MMIO. FYI. mrfioc2 makes use of VME/PCI interrupts, which
aren't a feature of MRF's network protocol.
- References:
- EPICS Module mrfioc2 Abdalla Ahmad via Tech-talk
- Navigate by Date:
- Prev:
Re: EPICS Archiver routing issue Hu, Yong via Tech-talk
- Next:
Difference between caput/caget and PVwrite Pilar Gil via Tech-talk
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
<2021>
2022
2023
2024
2025
- Navigate by Thread:
- Prev:
Re: EPICS Module mrfioc2 Hu, Yong via Tech-talk
- Next:
Difference between caput/caget and PVwrite Pilar Gil via Tech-talk
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
<2021>
2022
2023
2024
2025