| 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 <2021> 2022 2023 2024 2025 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 <2021> 2022 2023 2024 2025 |
| <== Date ==> | <== Thread ==> |
|---|
| Subject: | MDEL Field |
| From: | Alfio Rizzo via Tech-talk <tech-talk at aps.anl.gov> |
| To: | "tech-talk at aps.anl.gov" <tech-talk at aps.anl.gov> |
| Date: | Tue, 6 Apr 2021 19:01:29 +0000 |
|
Hi I would like to have some clarification about the MDEL field. If I understood correctly from the online documentation, If I set a value > 0 , the PV monitor (camonitor or pvmonitor) should be triggered if and only if ABS(ValPrev - ValCurr) > MDEL where ValPrev and ValCurr is the previous and current value of my PV. So, I have made some simualtion, but apparently the monitor is triggered also when the condition before is not satisfied.
Do I miss something ? Please let me know if I should send you more information
Thanks Best
PhD Alfio Rizzo Control System Integrator Integrated Control Systems Division European Spallation Source ERIC
Telephone: +46(0)721792342 Mail Address: P.O Box 176, SE 221 00 Lund, Sweden Visiting address: Odarslövsvägen 113, Lund
https://europeanspallationsource.se/
|
