1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 <2021> 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 <2021> 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Python Script call from Button press, module not found |
From: | "Manoussakis, Adamandios via Tech-talk" <tech-talk at aps.anl.gov> |
To: | "tech-talk at aps.anl.gov" <tech-talk at aps.anl.gov> |
Date: | Wed, 14 Apr 2021 17:31:26 +0000 |
Hi All, I am currently calling a python script we have from a button press in CSS. When I do this from a command button (python example.py) press it runs fine but I wanted to use a button that triggers when a pv is updated (using the Scripts section
under behaviors) so I switched over to that setup. But when it runs it seems like Jython isn’t finding my python modules (log shows not finding module), is there a PATH issue that I need to set in settings.ini or something similar for Jython? I did explore using pythonIoc and moving the whole script in there but at the moment I think just having CSS call the python script might be the easier route. Thanks, Adam |