1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 <2021> 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 <2021> 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Re: arv-tool-0.8 with FLIR-Blackfly camera |
From: | "Wang, SuYin Grass via Tech-talk" <tech-talk at aps.anl.gov> |
To: | "Rivers, Mark L." <rivers at cars.uchicago.edu> |
Cc: | "tech-talk at aps.anl.gov" <tech-talk at aps.anl.gov> |
Date: | Thu, 3 Jun 2021 18:13:50 +0000 |
Hi Mark,
The network is an ethernet port with static IP address. The cable is connecting directly from camera to the laptop.
eno2: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 9000
inet 192.168.1.5 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 fe80::2101:2192:d0e8:15fe prefixlen 64 scopeid 0x20<link>
ether 74:78:27:47:50:46 txqueuelen 1000 (Ethernet)
RX packets 53 bytes 8866 (8.6 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 18465 bytes 3934095 (3.7 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 16 memory 0xcc300000-cc320000
Thank you!
Grass
From: Mark Rivers <rivers at cars.uchicago.edu>
Sent: Thursday, June 3, 2021 1:03 PM To: Wang, SuYin Grass <grass at anl.gov> Cc: tech-talk at aps.anl.gov <tech-talk at aps.anl.gov> Subject: Re: arv-tool-0.8 with FLIR-Blackfly camera Hi Grass,
I am including tech-talk in this, I forgot to CC tech-talk in my original reply. > I am not sure why does the arv-tool-0.8 can get the camera name correct, but then complained "Invalid Genicam data" It sounds like perhaps it is a network configuration problem, for example jumbo packets being enabled on the NIC but not on some intermediate switch or something. What is the network path from the Linux machine to the camera? Mark ________________________________ From: Wang, SuYin Grass <grass at anl.gov> Sent: Thursday, June 3, 2021 12:55 PM To: Mark Rivers Cc: Wang, SuYin Grass Subject: Re: arv-tool-0.8 with FLIR-Blackfly camera Hi Mark, I also tried to remove the fake camera, and I got the same error. This camera works fine with Spinnaker SDK in windows machine. I also try to ignore the arv-tool, just use the database existed. (st.cmd.BlackflyS_70S7M attached) areaDetector-R3-11/ADAravis/iocs/aravisIOC/iocBoot/iocAravis/st.cmd.BlackflyS_70S7M but the aravisConfig cannot find this camera. I am not sure why does the arv-tool-0.8 can get the camera name correct, but then complained "Invalid Genicam data" ==================error from IOC=== # aravisConfig(const char *portName, const char *cameraName, int enableCaching, size_t maxMemory, int priority, int stackSize) aravisConfig("ARV1", "FLIR-Blackfly S BFS-PGE-70S7M-19069593", 1, 0, 0, 0) ADAravis: Looking for camera 'FLIR-Blackfly S BFS-PGE-70S7M-19069593'... 2021/06/03 12:42:40.399 ADAravis:makeCameraObject: No camera found, err=Invalid Genicam data ================================== Thanks! Grass ________________________________ From: Mark Rivers <rivers at cars.uchicago.edu> Sent: Thursday, June 3, 2021 10:51 AM To: Wang, SuYin Grass <grass at anl.gov> Subject: RE: arv-tool-0.8 with FLIR-Blackfly camera Hi Grass, There are database and opi screens for that camera in ADGenICam. They are from Hinko Kocevar, so I think others are using that camera OK. What happens if you eliminate the fake camera? I have never tested with that. What version of aravis are you using? Can you put some other GigE camera on your network and see if arv-tool-0.8 works with that? This is the output of arv-tool-0.8 on my Centos 8 system. It is finding all of the cameras without the error you have. I believe it is built using aravis 0.8.1. [epics@viper ~]$ arv-tool-0.8 PointGrey-010AA71D (USB3) Allied Vision Technologies-GC1380H (02-2142A)-02-2142A-06178 (164.54.160.58) Allied Vision Technologies-GT1380 (02-2604A)-02-2604A-07008 (164.54.160.104) Allied Vision Technologies-Manta G-507C (E0022705)-50-0503419258 (164.54.160.21) Allied Vision Technologies-Manta G-507C (E0022705)-50-0503479241 (164.54.160.3) Allied Vision Technologies-Manta_G-146C (E0020011)-50-0503317598 (164.54.160.62) Point Grey Research-Blackfly BFLY-PGE-20E4C-13481965 (164.54.160.114) Mark From: Tech-talk <tech-talk-bounces at aps.anl.gov> On Behalf Of Wang, SuYin Grass via Tech-talk Sent: Thursday, June 3, 2021 10:35 AM To: tech-talk at aps.anl.gov Subject: arv-tool-0.8 with FLIR-Blackfly camera Hi Everyone, Is anyone here using the "FLIR-Blackfly S BFS-PGE-70S7M" camera? We decide to use ADAravis for our RHEL8 or RHEL7 machine. I just installed arv-tool-0.8 on my laptop(RHEL8). While the Aravis-Fake camera seems running fine, I got an error for my real camera (Invalid Genicam data). (tutorial-env) bash-4.4$ ./arv-fake-gv-camera-0.8 (tutorial-env) bash-4.4$ ./arv-tool-0.8 Aravis-Fake-GV01 (127.0.0.1) Failed to open device 'FLIR-Blackfly S BFS-PGE-70S7M-19069593': Invalid Genicam data Is there anything we need to modify before running the arv-tool? Thanks! Grass |