1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 <2021> 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 <2021> 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | FLIR camera bit depth configuration with ADSpinnaker |
From: | Florian Benedetti via Tech-talk <tech-talk at aps.anl.gov> |
To: | tech-talk at aps.anl.gov |
Date: | Wed, 16 Jun 2021 14:22:15 +0200 |
Hello,
Sorry if it’s not directly related to areaDetector/EPICS but I
have some issues when I try to configure the acquisition with
Flir/PointGrey cameras, I’m using the ADSpinnaker module and I
have GigE cameras (BFLY-PGE-23S6M) that should support 12 bits
depth images according to the FLIR datasheet. Unfortunately, I’m
getting an error message if GC_PixelCoding enum is set to
Mono12Packet:
2021/06/10 16:39:01.025 ADSpinnaker:grabImage: unsupported
pixel format=0xb
If GC_PixelCoding is set to 16bits instead, the acquisition works
but the images remain at 10 bit depth.
Did I miss something during the configuration? How I can
configure my cameras to work with 12 bit depth?
Thanks for your help.
Cheers.
Florian