Experimental Physics and Industrial Control System
Hi Lynn,
You can look at these 2 files to see how this is handled in asyn:
https://github.com/epics-modules/asyn/blob/master/configure/CONFIG_SITE
https://github.com/epics-modules/asyn/blob/master/asyn/Makefile
Mark
________________________________
From: Tech-talk <tech-talk-bounces at aps.anl.gov> on behalf of 网易邮件中心 via Tech-talk <tech-talk at aps.anl.gov>
Sent: Thursday, July 22, 2021 9:03 PM
To: tech-talk at aps.anl.gov
Subject: no rpc.h, ALH
Hi,
I met some question when install the alh extension.
The error was: no “rpc/rpc.h” file when install alh.
I use cenots 8 64, base7.0.6 and ALH downloaded from alh/documentation at master ・ epics-extensions/alh (github.com)<https://github.com/epics-extensions/alh/tree/master/documentation>, it might be
I think it might be the libtripc, but i could not find how to modify it.
Regards,
Lynn
- References:
- no rpc.h, ALH 网易邮件中心 via Tech-talk
- Navigate by Date:
- Prev:
Re: no rpc.h, ALH Matt Clarke via Tech-talk
- Next:
Channel Access Timeouts - ca(get|put) CA Priority Yendell, Gary (DLSLtd, RAL, LSCI) via Tech-talk
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
<2021>
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: no rpc.h, ALH Matt Clarke via Tech-talk
- Next:
Channel Access Timeouts - ca(get|put) CA Priority Yendell, Gary (DLSLtd, RAL, LSCI) via Tech-talk
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
<2021>
2022
2023
2024