1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 <2021> 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 <2021> 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Re: arv-tools not detecting USB3 camera |
From: | "Gofron, Kazimierz via Tech-talk" <tech-talk at aps.anl.gov> |
To: | "Engbretson, Mark S." <engbretson at anl.gov> |
Cc: | "tech-talk at aps.anl.gov \(tech-talk at aps.anl.gov\)" <tech-talk at aps.anl.gov> |
Date: | Mon, 13 Dec 2021 18:55:55 +0000 |
Hi Mark,
Good point, and I did not install aravis udev rules yet.
However, when arv-tools is run as root, it does not detect the USB3 camera either.
[root@xf11id-m3 ~]# arv-tool-0.8 -d all
=====[11:52:14.710] 🅸 interface> [GvDiscoverSocket::new] Add interface 127.0.0.1 (127.0.0.1) [11:52:14.710] 🅸 interface> [GvDiscoverSocket::new] Add interface 192.168.11.1 (192.168.11.255) [11:52:14.710] 🅸 interface> [GvDiscoverSocket::new] Add interface 10.69.24.152 (10.69.24.255) [11:52:14.711] 🅸 interface> [GvDiscoverSocket::new] Add interface 10.66.83.36 (10.66.83.255) [11:52:14.711] 🅸 interface> [GvDiscoverSocket::new] Add interface 192.168.122.1 (192.168.122.255) [11:52:14.712] 🅸 interface> [GvInterface::discovery] Device 'Point Grey Research-Blackfly BFLY-PGE-50S5C-18457368' found (interface 192.168.11.1) user_id '' - MAC '00:b0:9d:19:a3:18' [11:52:14.712] 🅸 interface> [GvInterface::discovery] Device 'Point Grey Research-Blackfly BFLY-PGE-50S5C-18481534' found (interface 192.168.11.1) user_id '' - MAC '00:b0:9d:1a:01:7e' Point Grey Research-Blackfly BFLY-PGE-50S5C-18457368 (192.168.11.11) Point Grey Research-Blackfly BFLY-PGE-50S5C-18481534 (192.168.11.12)
Something else is missing on RedHat...
Kaz
From: Engbretson, Mark S. <engbretson at anl.gov>
Sent: Monday, December 13, 2021 1:11 PM To: Gofron, Kazimierz <kgofron at bnl.gov> Cc: tech-talk at aps.anl.gov (tech-talk at aps.anl.gov) <tech-talk at aps.anl.gov> Subject: RE: arv-tools not detecting USB3 camera Do you have the aravis udev rules installed so that non root accounts can actually see the usb3 hardware?
From: Tech-talk <tech-talk-bounces at aps.anl.gov> On Behalf Of Gofron, Kazimierz via Tech-talk
Hi,
I have a USB3 Grasshopper3 GS3-U3-51S5C camera that arv-tools-0.8 is not detecting. The GS3-U3-51S5C supports USB3 Vision v1.0, OS: Redhat 8.4
{Aravis detects only my GigE cameras:} kgofron@xf11id-m3:/epics/iocs$ arv-tool-0.8 Point Grey Research-Blackfly BFLY-PGE-50S5C-18457368 (192.168.11.11) Point Grey Research-Blackfly BFLY-PGE-50S5C-18481534 (192.168.11.12)
{arv-tools with options does not list usb camera either}
kgofron@xf11id-m3:/epics/iocs$ arv-tool-0.8 -d all ---- ============ {The camera shows up in libusb and /dev/bus/usb, but is not found by arv-tool:}
kgofron@xf11id-m3:/epics/iocs/cam-aravis1$ lsusb
kgofron@xf11id-m3:/epics/iocs$ ls /dev/bus/usb/002/003
{USB camera is on bus 002 device 003}
Camera details: kgofron@xf11id-m3:/dev/bus/usb/002$ usb-devices T: Bus=02 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 3 Spd=5000 MxCh= 0 D: Ver= 3.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=1e10 ProdID=3300 Rev=00.00 S: Manufacturer=Point Grey Research S: Product=Grasshopper3 GS3-U3-51S5C S: SerialNumber=0123EF71 C: #Ifs= 3 Cfg#= 1 Atr=80 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ef(misc ) Sub=05 Prot=00 Driver=(none) I: If#=0x1 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=05 Prot=01 Driver=(none) I: If#=0x2 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=05 Prot=02 Driver=(none)
============
USB support is installed: libusb-devel.x86_64 libusbx-devel.x86_64 =============
Any suggestions about this problem?
Kazimierz Gofron
|