1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 <2022> 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 <2022> 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | RE: Adding a second output array to an areaDetector IOC |
From: | Mark Rivers via Tech-talk <tech-talk at aps.anl.gov> |
To: | Iain Marcuson <iain.marcuson at sydortechnologies.com>, "tech-talk at aps.anl.gov" <tech-talk at aps.anl.gov> |
Date: | Sun, 30 Jan 2022 22:17:57 +0000 |
Ø
I did try changing “addr” in the second call. That did indeed keep pImage from being overwritten.
Ø
That did indeed keep pImage from being overwritten.
Do you really mean pImage was overwritten, or do you mean the waveform record in the NDStdArrays plugin? The latter is what
doCallbacksGenericPointer() writes to. Ø
However, the data in pProfile were being overwritten.
Again, do you really mean pProfile (which is the source of the data, not the destination), or do you mean the waveform record in the NDStdArrays plugin? What are they being overwritten with?
Ø
When I used an addr of 0, the pProfile data were correct (I used fixed values for debugging.)
Again, do you really mean pProfile was correct, or do you mean the waveform record in the NDStdArrays plugin? Please send screen shots of both of your NDPluginStdArrays screens. Mark From: Iain Marcuson <iain.marcuson at sydortechnologies.com>
I apologize for the long delay. I did try changing “addr” in the second call. That did indeed keep pImage from being overwritten. However, the data in pProfile were being overwritten. When I used an addr of 0, the pProfile data were
correct (I used fixed values for debugging.) However, when I used an addr of 1, the values coming from pProfile were very incorrect, despite having been written right before a getIntegerParam() and the
doCallbacksGenericPointer(pImage, NDArrayData, 0). I am unsure what would cause the issues I was seeing. From: Mark Rivers <rivers at cars.uchicago.edu>
Hi Iain, Before answering your question, I have 2 suggestions:
If you really do want to export an NDArray then you just need need to change "addr" in the second call to 1, because that is the addr you defined for the xprof profile. doCallbacksGenericPointer(pImage, NDArrayData, 0); // And call for profile doCallbacksGenericPointer(pProfile, NDArrayData, 1); Mark From: Tech-talk <tech-talk-bounces at aps.anl.gov> on behalf of Iain Marcuson via Tech-talk <tech-talk at aps.anl.gov> As an addendum, I was able to get $(P)xprof:ArrayData updating by doing caput $(P)xprof:EnableCallbacks 1 although I still have the problem of the output data collision. From: Tech-talk <tech-talk-bounces at aps.anl.gov>
On Behalf Of Iain Marcuson via Tech-talk I am working on a custom areaDetector IOC and also trying to learn more of the general areaDetector architecture. For a first test, I have tried to add some profile functionality to the IOC. I have started by creating an array for the output, following the example from mythen. # Create a standard arrays plugin NDStdArraysConfigure("Image1", 3, 0, "$(PORT)", 0, 0) dbLoadRecords("$(ADCORE)/db/NDStdArrays.template", "P=$(PREFIX),R=image1:,PORT=Image1,ADDR=0,TIMEOUT=1,NDARRAY_PORT=$(PORT),NDARRAY_ADDR=0,TYPE=Float64,FTVL=DOUBLE,NELEMENTS=$(NCHANS)") # Create a standard arrays plugin for column profile NDStdArraysConfigure("XProfile", 3, 0, "$(PORT)", 0, 0) dbLoadRecords("$(ADCORE)/db/NDStdArrays.template", "P=$(PREFIX),R=xprof:,PORT=XProfile,ADDR=0,TIMEOUT=1,NDARRAY_PORT=$(PORT),NDARRAY_ADDR=1,TYPE=Float64,FTVL=DOUBLE,NELEMENTS=$(NCOLS)") In the callback of the IOC, I create an NDArray for a column profile and populate the array. When I run the IOC and start acquisition, $(P)xprof:ArrayData is undefined but of the correct size. When I look at the image output in ImageJ, the display flickers between the full image and a one-row display of the profile data. Some
experimentation leads me to believe that the problem comes from the following lines: if (arrayCallbacks) { /* Call the NDArray callback */ doCallbacksGenericPointer(pImage, NDArrayData, 0); // And call for profile doCallbacksGenericPointer(pProfile, NDArrayData, 0); } How can I get the two data separate? Is the solution to make a profile plugin and feed the data to that? Thank you, Iain Marcuson Software Engineer, Sydor Technologies 585.278.1168 |
www.SydorTechnologies.com Skype:
iain.marcuson at sydorinstruments.com This message has been scanned for malware by Forcepoint.
www.forcepoint.com Click
here to report this email as spam. |