1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 <2022> 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 <2022> 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | ADEiger R3-4 EIGER1 param=high_voltage/state |
From: | John Dobbins via Tech-talk <tech-talk at aps.anl.gov> |
To: | "tech-talk at aps.anl.gov" <tech-talk at aps.anl.gov> |
Date: | Wed, 15 Jun 2022 18:36:18 +0000 |
All,
I just built ADEiger from the current Master (R3-4). When I start the EIGER1 IOC I get a message
RestApi::get: [param=high_voltage/state] server returned error code 500
2022/06/15 14:23:47.959 Param[HV_STATE]::baseFetch: [param=high_voltage/state] unable to parse json response
[]
2022/06/15 14:23:47.959 Param[HV_STATE]::fetch<string>: [param=HV_STATE] underlying baseFetch failed
The is after eigerDetectorConfig.
According to the ADEiger/RELEASE.md high_voltage/state is only available on EIGER2.
asyn port: EIG
EPICS name: EIG2:cam1:
Model: Eiger 4M
Firmware: eiger-1.6.6-272.gitb59a1d9.release
SDK: 1.6.6
Driver version: 3.4.0
ADCore : 3.12.1
John Dobbins
Research Support Specialist
Cornell High Energy Synchrotron Source
Cornell University
|