| 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 <2022> 2023 2024 2025 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 <2022> 2023 2024 2025 |
| <== Date ==> | <== Thread ==> |
|---|
| Subject: | RE: Digitizers |
| From: | GAGET Alexis via Tech-talk <tech-talk at aps.anl.gov> |
| To: | "Roehrig, Christian" <roehrig at anl.gov>, "tech-talk at aps.anl.gov" <tech-talk at aps.anl.gov> |
| Date: | Fri, 17 Jun 2022 16:15:42 +0000 |
|
Hello, You can look in "D-tacq solutions" products , they have different FMC modules that should work for you and they have EPICS support.
"Ioxos" also proposes some cards, adc3112 for you seems ok, but not sure the EPICS driver support exist for this one (we use adc3117 at CEA but it should be close), maybe used at ESS ?
Alexis CEA Saclay, FR
De : Tech-talk <tech-talk-bounces at aps.anl.gov> de la part de Roehrig, Christian via Tech-talk <tech-talk at aps.anl.gov>
Envoyé : vendredi 17 juin 2022 17:59:19 À : tech-talk at aps.anl.gov Objet : Digitizers Hello, I am looking for a waveform digitizer that has an ethernet interface, 4 input channels, at least 12-bit ADCs, a sampling rate of at least 10 MS/s, an external trigger input, and existing EPICS support.
Does anyone have a recommendation? Thank you. Chris -- Christian Roehrig Principal Controls Engineer Accelerator Systems Division Argonne National Laboratory Office: 630-252-7278 Cell: 630-327-6855 |