Re: IOC file for motorMicronix MMC200

[Mark Rivers via Tech-talk <tech-talk at aps.anl.gov>]

Hi John Woo,

According to the online manuals for the Micronix MC100 and MC200 they only have USB-2.0 and RS-485 interfaces, not Ethernet. 

Do you mean an Ethernet terminal server?

Mark

Sent from my iPhone

On Aug 11, 2022, at 3:25 PM, Jong Woo Kim via Tech-talk <tech-talk at aps.anl.gov> wrote:



Hello EPICS community,

The following is the contents of motor.cmd.mmc200 file.

I assigned IP address on the MMC100 (I heard that motor.cmd.mmc200 works in MMC100 ).

So, I want to modify the file so that it works with Ethernet connection because it has been written for RS-232 with RS-485.

Is anybody who has the 'IP port' version of it? 

________________________________________________________

dbLoadTemplate("motor.substitutions.mmc200")

### RS-232 with RS-485 adpater (serial1)

#drvAsynSerialPortConfigure("serial1", "/dev/ttyS0", 0, 0, 0)

#!asynOctetSetInputEos("serial1",0,"\n\r")

#!asynOctetSetOutputEos("serial1",0,"\r")

# Turn on asyn traces

#!asynSetTraceIOMask("serial1",0,0x1)

#!asynSetTraceMask("serial1",0,0x3)

###

# MMC200CreateController(

#    motor port (will be created),

#    asyn port (must already exist),

#    num axes,

#    moving poll period (ms),

#    idle poll period (ms),

#    ignore limit flag)

###

#!MMC200CreateController("mmc200_1", "serial1", 2, 500, 2000, 1)

MMC200CreateController("mmc200_1", "serial1", 2, 500, 0, 1)

# Turn off asyn traces

#!asynSetTraceIOMask("serial1",0,0x0)

#!asynSetTraceMask("serial1",0,0x1)

______________________________________________________________