Experimental Physics and Industrial Control System
Hi,
I am developing an EPICS asyn stream device for a Hirst Magnetics GM08 handheld unit and probe.
I think I have tied down my development and my MVP is going to be just reading a stream that is polling every second, without me sending an RS232 command down the line. It is a fairly simple device communicating at 9600,N,8,1 and I can use screen /dev/ttyS0 9600 in Ubuntu 20.00 to have the device send back terminated data.
Looks a bit like this where the left float is a milliTesla and the 300 is stated units.
00.020 300CrLf
00.002 300CrLf
-0.001 300CrLf
When I try to hook this up to stream and asyn using the latest devices against drvSerial and with the debug loaded. I’m having a hard time getting the INP to read the data
I have turned on asynTraceMask and get no chatter, plus used the stream debug to see it connect on /dev/ttyS0 at the permissionable addressed Linux COM1 on my motherboard. I get something with not being able to instantiate the PV when I do a dbtr HIRST1:current_value.
Has anyone developed EPICS against this? Or would a kind person take a glance at my IOC development?
Kind Regards
Tim Speight
- Replies:
- RE: Base 7.0.7 + latest Mark Rivers via Tech-talk
- Navigate by Date:
- Prev:
Re: error during building synapps module Mark Rivers via Tech-talk
- Next:
RE: Base 7.0.7 + latest Mark Rivers via Tech-talk
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
<2022>
2023
2024
- Navigate by Thread:
- Prev:
Re: error during building synapps module Mark Rivers via Tech-talk
- Next:
RE: Base 7.0.7 + latest Mark Rivers via Tech-talk
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
<2022>
2023
2024