EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  <20222023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  <20222023  2024 
<== Date ==> <== Thread ==>

Subject: point pcaspy to EPICS 7
From: "Gregory, Ray via Tech-talk" <tech-talk at aps.anl.gov>
To: "tech-talk at aps.anl.gov" <tech-talk at aps.anl.gov>
Date: Thu, 6 Oct 2022 18:19:26 +0000

Hi,

 

I have recently built EPICS 7 on a machine that I usually run IOCs with an older version of EPICS (EPICS 3.14.12.6 and EPICS 4.6). Some of these IOCs are Python IOCs that use pcaspy.

 

I would like to create a pcaspy-based IOC on this machine that uses the new EPICS 7 that I have built.

 

How do I point pcaspy to use the new EPICS 7?

 

Thanks,

 

Ray

 

Ray Gregory

Oak Ridge National Laboratory

 

 


Replies:
Re: point pcaspy to EPICS 7 Ralph Lange via Tech-talk
Re: point pcaspy to EPICS 7 Wang Xiaoqiang (PSI) via Tech-talk

Navigate by Date:
Prev: Re: Exploring EPICS performance/processing limits Marco A. Barra Montevechi Filho via Tech-talk
Next: RE: Exploring EPICS performance/processing limits Mark Rivers via Tech-talk
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  <20222023  2024 
Navigate by Thread:
Prev: Re: EPICS driver / support for "USS" Device: Leybold Turbovac iX Ralph Lange via Tech-talk
Next: Re: point pcaspy to EPICS 7 Ralph Lange via Tech-talk
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  <20222023  2024