Hi all,
I am using synapps_6_1 and xxx module.
Now I started the xxx ioc, sscan module was good, but motor was not. And I want to use the simulate Motor.
Then I modified "common.iocsh" in xxx-R6-1/iocBoot/iocxxx, added following lines:
iocshLoad("$(MOTOR)/iocsh/allstop.iocsh", "P=$(PREFIX)")
dbLoadTemplate("$(MOTOR)/modules/motorMotorSim/iocs/motorSimIOC/iocBoot/iocMotorSim/motor.substitutions")
It failed except the "AllStop Button" in xxx OPI.
How should i do it, add the simMotor in xxx.
Thanks,
Liang