Compiling IOC with sequencer from scratch. seq command not found.

["Marco A. Barra Montevechi Filho via Tech-talk" <tech-talk at aps.anl.gov>]

Hello all, good evening.

Im sorry if the doubt is trivial, but i cant find what the problem is.
Since makeBaseApp.pl -t example ioc generates several things that i dont need in my application, im trying to compile a sequencer stateMachine from scratch, with makeBaseApp -t ioc. Following the documentation (https://www-csr.bessy.de/control/SoftDist/sequencer/Installation.html#configure-and-build) i did:

> makeBaseApp.pl -t ioc SoftKin
> makeBaseApp.pl -i -t ioc SoftKin

Added the path to my sequencer installation as SNCSEQ in configure/RELEASE file. Added an example state machine file called Kinematics.stt in SoftKinApp/src/ folder and in the Makefile:

SoftKin_SRCS += Kinematics.stt
SoftKin_LIBS += seq pv

I compiled it and it went OK. Kinematics.stt was clearly transformed into a cpp code and then compiled.

However, when starting the IOC, at the end of my cmd file i get:

seq Kinematics,"BLP=SOL:,HP=S:,MP=m1"
st.cmd line 22: Command seq not found.

Am i forgetting something in the Makefiles? I tried using the examples of makeBaseApp.pl to understand what is missing but i think im getting lost in application name conversions. I append cmd file, configure/RELEASE and SoftKin/src/Makefil at the end of this e-mail.

Thanks for any suggestions,

Marco

###############CONFIGURE/RELEASE:

EPICS_BASE = /usr/local/epics-nfs/base/R7.0.7

SNCSEQ = /usr/local/epics-nfs/modules/R7.0.7/synApps_6_2/synApps/support/seq-2-2-9/

# Set RULES here if you want to use build rules from somewhere

# other than EPICS_BASE:

#RULES = $(MODULES)/build-rules

# These lines allow developers to override these RELEASE settings

# without having to modify this file directly.

-include $(TOP)/../RELEASE.local

-include $(TOP)/../RELEASE.$(EPICS_HOST_ARCH).local

-include $(TOP)/configure/RELEASE.local

################SOFTKINAPP/SRC/MAKEFILE:
TOP=../..

include $(TOP)/configure/CONFIG

#----------------------------------------

#  ADD MACRO DEFINITIONS AFTER THIS LINE

#=============================

#=============================

# Build the IOC application

PROD_IOC = SoftKin

# SoftKin.dbd will be created and installed

DBD += SoftKin.dbd

# SoftKin.dbd will be made up from these files:

SoftKin_DBD += base.dbd

# Include dbd files from all support applications:

#SoftKin_DBD += xxx.dbd

# Add all the support libraries needed by this IOC

#SoftKin_LIBS += xxx

# SoftKin_registerRecordDeviceDriver.cpp derives from SoftKin.dbd

SoftKin_SRCS += SoftKin_registerRecordDeviceDriver.cpp

####SoftKin_SRCS += Kinematics.stt

# Build the main IOC entry point on workstation OSs.

SoftKin_SRCS_DEFAULT += SoftKinMain.cpp

SoftKin_SRCS_vxWorks += -nil-

# Add support from base/src/vxWorks if needed

#SoftKin_OBJS_vxWorks += $(EPICS_BASE_BIN)/vxComLibrary

#####ADD Sequencer

#SoftKin_DBD +=

#SoftKinSupport_LIBS += seq pv

SoftKin_SRCS += Kinematics.stt

SoftKin_LIBS += seq pv

# Finally link to the EPICS Base libraries

SoftKin_LIBS += $(EPICS_BASE_IOC_LIBS)

#SoftKin_LIBS += seq pv

#===========================

include $(TOP)/configure/RULES

#----------------------------------------

#  ADD RULES AFTER THIS LINE

############ CMD FILE:

#!../../bin/linux-x86_64/SoftKin

#- You may have to change SoftKin to something else

#- everywhere it appears in this file

< envPaths

cd "${TOP}"

## Register all support components

dbLoadDatabase "dbd/SoftKin.dbd"

SoftKin_registerRecordDeviceDriver pdbbase

## Load record instances

#dbLoadRecords("db/SoftKin.db","user=marco")

dbLoadTemplate("${TOP}/SoftKinApp/Db/Kinematics.substitutions")

cd "${TOP}/iocBoot/${IOC}"

iocInit

## Start any sequence programs

seq Kinematics,"BLP=SOL:,HP=S:,MP=m1"

Aviso Legal: Esta mensagem e seus anexos podem conter informações confidenciais e/ou de uso restrito. Observe atentamente seu conteúdo e considere eventual consulta ao remetente antes de copiá-la, divulgá-la ou distribuí-la. Se você recebeu esta mensagem por engano, por favor avise o remetente e apague-a imediatamente.

Disclaimer: This email and its attachments may contain confidential and/or privileged information. Observe its content carefully and consider possible querying to the sender before copying, disclosing or distributing it. If you have received this email by mistake, please notify the sender and delete it immediately.