1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 <2023> 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 <2023> 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Re: creating soft channel ioc to interface with real ioc |
From: | Mark Rivers via Tech-talk <tech-talk at aps.anl.gov> |
To: | "Tran, Phi Dung" <ptran1 at bnl.gov> |
Cc: | "tech-talk at aps.anl.gov" <tech-talk at aps.anl.gov> |
Date: | Wed, 11 Oct 2023 12:54:18 +0000 |
Your IOC application needs to be built with the DBD and library file from the EPICS motor module. Add lines like this to your application Makefile:
MyApp_DBD += motorSupport.dbd
MyApp_LIBS := motor (MyApp_LIBS)
If you are using the Galil driver then also add lines like this:
MyApp_DBD += GalilSupport.dbd
MyApp_LIBS := GalilSupport (MyApp_LIBS)
You need to add the paths to those modules to your application configure/RELEASE file as well.
Mark
On Oct 11, 2023, at 7:28 AM, Tran, Phi Dung via Tech-talk <tech-talk at aps.anl.gov> wrote:
|