1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 <2024> | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 <2024> |
<== Date ==> | <== Thread ==> |
---|
Subject: | Problems setting motor position on Galil controller |
From: | Mark Rivers via Tech-talk <tech-talk at aps.anl.gov> |
To: | "tech-talk at aps.anl.gov" <tech-talk at aps.anl.gov> |
Date: | Fri, 19 Jan 2024 00:28:21 +0000 |
Folks, I am having 2 serious issues with using “set” mode in the motor record to set the current motor position on a Galil controller.
Note that driving to a limit and then setting the position is a common operation, because we know what the absolute position of the limit switch is. But this does not work at all with the Galil. Have others seen these problems? Am I doing something wrong? Thanks, Mark |
Attachment:
Set_to_0_at_1.png
Description: Set_to_0_at_1.png
Attachment:
Set_to_0_at_-10_on_limit.png
Description: Set_to_0_at_-10_on_limit.png