1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 <2024> | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 <2024> |
<== Date ==> | <== Thread ==> |
---|
Subject: | RE: Install EPICS on Raspberry pi and control motor |
From: | Mark Rivers via Tech-talk <tech-talk at aps.anl.gov> |
To: | whitetiger1123 <holyeongbaeg at gmail.com>, "tech-talk at aps.anl.gov" <tech-talk at aps.anl.gov> |
Date: | Tue, 30 Jan 2024 00:53:10 +0000 |
You can use any type of RS-232 or Ethernet controller with the Raspberry Pi. For example motorAcs supports the ACS MCB-4B serial controller, and Galil supports the Ethernet Galil controllers. Mark
From: Tech-talk <tech-talk-bounces at aps.anl.gov>
On Behalf Of whitetiger1123 via Tech-talk Hi, all. I have 1 question. I want to study EPICS and motor control, so I’ll make a small independent control system with raspberry pi B3 Model. What kind of motor module should I use? motorPI is for raspberry pi? Thanks for your help. Best and Regards, Baeg |