1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 <2024> | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 <2024> |
<== Date ==> | <== Thread ==> |
---|
Subject: | Re: Install EPICS on Raspberry pi and control motor |
From: | Pete Jemian via Tech-talk <tech-talk at aps.anl.gov> |
To: | tech-talk at aps.anl.gov |
Date: | Mon, 29 Jan 2024 19:19:22 -0600 |
motorPI is for motor controllers from Physik Instrumente. https://github.com/search?q=org%3Aepics-modules+motorpi&type=code On 1/29/2024 6:53 PM, Mark Rivers via Tech-talk wrote:
* What kind of motor module should I use? motorPI is for raspberry pi? You can use any type of RS-232 or Ethernet controller with the Raspberry Pi. For example motorAcs supports the ACS MCB-4B serial controller, and Galil supports the Ethernet Galil controllers. Mark *From:*Tech-talk <tech-talk-bounces at aps.anl.gov> *On Behalf Of *whitetiger1123 via Tech-talk *Sent:* Wednesday, October 11, 2023 2:30 AM *To:* tech-talk at aps.anl.gov *Subject:* Install EPICS on Raspberry pi and control motor Hi, all. I have 1 question. I want to study EPICS and motor control, so I’ll make a small independent control system with raspberry pi B3 Model. What kind of motor module should I use? motorPI is for raspberry pi? Thanks for your help. Best and Regards, Baeg
-- ---------------------------------------------------------- Pete R. Jemian, Ph.D. <jemian at anl.gov> Beam line Controls and Data Acquisition (BC, aka BCDA) Advanced Photon Source, Argonne National Laboratory Argonne, IL 60439 630 - 252 - 3189 ----------------------------------------------------------- Education is the one thing for which people are willing to pay yet not receive. -----------------------------------------------------------