| 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 <2024> 2025 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 <2024> 2025 |
| <== Date ==> | <== Thread ==> |
|---|
| Subject: | Re: RMP, REP garbage value |
| From: | Kevin Peterson via Tech-talk <tech-talk at aps.anl.gov> |
| To: | whitetiger1123 <holyeongbaeg at gmail.com>, "tech-talk at aps.anl.gov" <tech-talk at aps.anl.gov> |
| Date: | Thu, 1 Feb 2024 09:47:10 -0600 |
Baeg, Is the source code for the motor driver on github? Kevin On 2/1/24 00:41, whitetiger1123 via Tech-talk wrote:
Hi, all. I have a question for a lot of epics officials and experts. I made the controller with raspberry pie and plc for simple motor control.However, if I looked at the epics css opi, I could see that the rmp or rep values were floating with strange garbage values.Of course, I can force the value to be 0 by specifying the offset value, but when I turn off the controller,the garbage values are floating again in rmp, rep and val, dval, and rval. What can I do about this? Please advise me. Sincerely, Baeg