Re: Required Perl modules?

[John Dobbins via Tech-talk <tech-talk at aps.anl.gov>]

Mark,

I am working on getting the camera recognized on linux.

I did plug it into a Windows machine where SpinView caches the XML into 

C:\ProgramData\Spinnaker\Shared\XML

From which I got the attached (in a zip archive)  XML file. Does it look reasonable?  I will try arv-tool soon.

John

---

From: Mark Rivers <rivers at cars.uchicago.edu>
Sent: Wednesday, June 5, 2024 2:41 PM
To: John Dobbins <john.dobbins at cornell.edu>
Cc: tech-talk at aps.anl.gov <tech-talk at aps.anl.gov>
Subject: RE: Required Perl modules?

 

Hi John,

 

Have you extracted the XML file for that camera using arv-tool?  If you send it to me I’ll add it to ADGenICam and create the .template and OPI files for it.

 

Mark

 

 

From: John Dobbins <john.dobbins at cornell.edu>
Sent: Wednesday, June 5, 2024 1:36 PM
To: Mark Rivers <rivers at cars.uchicago.edu>
Cc: tech-talk at aps.anl.gov
Subject: Re: Required Perl modules?

 

I should add, I am trying to use a FLIR BFS-U3-161S7M

 

John

---

From: John Dobbins <john.dobbins at cornell.edu>
Sent: Wednesday, June 5, 2024 2:25 PM
To: Mark Rivers <rivers at cars.uchicago.edu>
Cc: tech-talk at aps.anl.gov <tech-talk at aps.anl.gov>
Subject: Re: Required Perl modules?

 

Is there an example st.cmd file for a BlackFlyS USB camera?

 

iocBoot/iocSpinnaker/start_epics  references st.cmd.bflys_usb3

 

but that doesn't exist.

 

Thanks,

 

John

---

From: John Dobbins <john.dobbins at cornell.edu>
Sent: Wednesday, June 5, 2024 9:32 AM
To: Mark Rivers <rivers at cars.uchicago.edu>
Cc: tech-talk at aps.anl.gov <tech-talk at aps.anl.gov>
Subject: Re: Required Perl modules?

 

My bad.  I incorrectly cloned ADGenICam into ADGeniCam.  John

---

From: John Dobbins <john.dobbins at cornell.edu>
Sent: Wednesday, June 5, 2024 9:28 AM
To: Mark Rivers <rivers at cars.uchicago.edu>; John Dobbins <john.dobbins at cornell.edu>
Cc: tech-talk at aps.anl.gov <tech-talk at aps.anl.gov>
Subject: Re: Required Perl modules?

 

I should note the running make in ADGeniCam works but running make in support_flir stir produces the same error.

 

John

---

From: Tech-talk <tech-talk-bounces at aps.anl.gov> on behalf of John Dobbins via Tech-talk <tech-talk at aps.anl.gov>
Sent: Wednesday, June 5, 2024 9:22 AM
To: Mark Rivers <rivers at cars.uchicago.edu>
Cc: tech-talk at aps.anl.gov <tech-talk at aps.anl.gov>
Subject: Re: Required Perl modules?

 

Mark,

 

Using base-7.0.6, areaDetector-R3-13,  and your list of prerequisites below I have gotten as far as ADGeniCam (in my effort to get to ADSpinnaker).

 

Stuck at:

 

make[4]: Entering directory '/nfs/chess/epics/det/support_flir/areaDetector-R3-13/ADCore/ADApp/op'

make[4]: Nothing to be done for 'install'.

make[4]: Leaving directory '/nfs/chess/epics/det/support_flir/areaDetector-R3-13/ADCore/ADApp/op'

make[3]: Leaving directory '/nfs/chess/epics/det/support_flir/areaDetector-R3-13/ADCore/ADApp'

make[2]: Leaving directory '/nfs/chess/epics/det/support_flir/areaDetector-R3-13/ADCore'

make -C /nfs/chess/epics/det/support_flir/areaDetector-R3-13/ADGenICam install

make[2]: Entering directory '/nfs/chess/epics/det/support_flir/areaDetector-R3-13/ADGenICam'

make[2]: *** No rule to make target 'install'.  Stop.

make[2]: Leaving directory '/nfs/chess/epics/det/support_flir/areaDetector-R3-13/ADGenICam'

make[1]: *** [/nfs/chess/epics/det/base-7.0.6/configure/RULES_DIRS:85: /nfs/chess/epics/det/support_flir/areaDetector-R3-13/ADGenICam.install] Error 2

make[1]: Leaving directory '/nfs/chess/epics/det/support_flir/areaDetector-R3-13'

make: *** [/nfs/chess/epics/det/base-7.0.6/configure/RULES_DIRS:85: /nfs/chess/epics/det/support_flir/areaDetector-R3-13.install] Error 2

jad22@lnx209 $ gedit /nfs/chess/epics/det/base-7.0.6/configure/RULES_DIRS &

 

 

John

 

---

From: Mark Rivers <rivers at cars.uchicago.edu>
Sent: Monday, June 3, 2024 9:31 PM
To: John Dobbins <john.dobbins at cornell.edu>
Cc: tech-talk at aps.anl.gov <tech-talk at aps.anl.gov>
Subject: Re: Required Perl modules?

 

Hi John,

 

This is what I have found necessary for our installations.

 

In order to build EPICS base and the synApps support tree, including our local application, on RHEL 9  I needed to install the following additional packages:

 

• telnet
• libusb-devel
• perl-FindBin
• perl-ExtUtils-Command
• re2c
• rpcgen
• libtirpc-devel
• boost-devel
• readline-devel
• libssh2-devel
• zeromq-devel
• libraw1394-devel

 

areaDetector needs aravis to be installed.  aravis requires installing

• aravis clone from Github.  I put it in /usr/local/aravis
• glib2-devel
• libxml2-devel
• meson
• Building aravis according to these instructions:https://aravisproject.github.io/aravis/aravis-stable/building.html

 

Measurement Computing support requires installing their uldaq library, which is built from source.  That can be built and installed as follows:

• Clone https://github.com/mccdaq/uldaq
• Run the following commands:

./configure

make

sudo make install

 

Mark

 

Sent from my iPhone

On Jun 3, 2024, at 7:20 PM, John Dobbins via Tech-talk <tech-talk at aps.anl.gov> wrote:



All,

 

I am building EPICS support on a new (for me) version of linux, Alma 9.  Previous work on Scientific Linux 7.

 

I got to calc-R3-7-5 and I run into a PERL related error. 

 

perl -CSD -MExtUtils::Command -e cat ../calcSupport_LOCAL.dbd ../calcSupport_withSSCAN.dbd ../calcSupport_withSNCSEQ.dbd > calcSupport.dbd

Can't locate ExtUtils/Command.pm in @INC (you may need to install the ExtUtils::Command module) (@INC contains: /usr/local/lib64/perl5/5.32 /usr/local/share/perl5/5.32 /usr/lib64/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib64/perl5 /usr/share/perl5).

BEGIN failed--compilation aborted.

 

A quick look at the Alma 9 PERL install shows ExtUtils missing.  

 

I see that the Alma 9 PERL install appears to be missing other modules I see in the SL7 PERL install.

 

I am wondering if there is a list PERL modules needed for EPICS build?  (as opposed to discovery by trial)

 

Thanks,

 

John Dobbins

 

Research Support Specialist

Cornell High Energy Synchrotron Source

Cornell University

 

www.chess.cornell.edu

 

 

 

Attachment: BLACKFLY_S_BFS-U3-161S7M_7E492D404E6AACB7BECEC95AF0BFC7A6FB55DBE6_GUI.zip
Description: BLACKFLY_S_BFS-U3-161S7M_7E492D404E6AACB7BECEC95AF0BFC7A6FB55DBE6_GUI.zip