1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 <2024> | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 <2024> |
<== Date ==> | <== Thread ==> |
---|
Subject: | Re: ADSpinnaker, BlackfkyS 161S7M Not enough available memory to allocate buffers for streaming |
From: | John Dobbins via Tech-talk <tech-talk at aps.anl.gov> |
To: | "tech-talk at aps.anl.gov" <tech-talk at aps.anl.gov> |
Date: | Thu, 6 Jun 2024 17:35:07 +0000 |
After configuring USB-FS memory I now have the camera running.
One thing I don't understand is that I can't set the Acquire period below 0.375 seconds, i.e a frame rate of 2.66 Hz.
Is there a bandwidth limit somewhere?
Thanks,
John
From: Engbretson, Mark S. <engbretson at anl.gov>
Sent: Thursday, June 6, 2024 11:59 AM To: John Dobbins <john.dobbins at cornell.edu> Subject: RE: ADSpinnaker, BlackfkyS 161S7M Not enough available memory to allocate buffers for streaming
From: Tech-talk <tech-talk-bounces at aps.anl.gov>
On Behalf Of John Dobbins via Tech-talk
I have built, base-7.0.6, areaDetectorR3-13 with ADSpinnaker master on Alma 9. I am using a FLIR BlackflyS 161S7M USB camera. This is large, 5320x3032 pixels.
The camera is detected but I get a "Not enough available memory to allocate buffers for streaming" error.
In ADSpinnakerConfig I have set numSPBuffer to minimum = 10 (?)
# ADSpinnakerConfig(const char *portName, const char *cameraId, int numSPBuffers, # size_t maxMemory, int priority, int stackSize) ADSpinnakerConfig("SP1", 22671882, 10, 0, 0,0)
The host computer has 16G, 13.7 G free,
Ideas?
John Dobbins
Research Support Specialist Cornell High Energy Synchrotron Source Cornell University
[root@lnx615 iocSpinnaker]# ../../bin/linux-x86_64/spinnakerApp st.cmd.BlackflyS_161S7M < envPaths epicsEnvSet("IOC","iocSpinnaker") epicsEnvSet("TOP","/nfs/chess/epics/det/support_flir/areaDetector-R3-13/ADSpinnaker/iocs/spinnakerIOC") epicsEnvSet("ADSPINNAKER","/nfs/chess/epics/det/support_flir/areaDetector-R3-13/ADSpinnaker/iocs/spinnakerIOC/../..") epicsEnvSet("SUPPORT","/nfs/chess/epics/det/support_flir") epicsEnvSet("ASYN","/nfs/chess/epics/det/support_flir/asyn-R4-45") epicsEnvSet("AREA_DETECTOR","/nfs/chess/epics/det/support_flir/areaDetector-R3-13") epicsEnvSet("ADSUPPORT","/nfs/chess/epics/det/support_flir/areaDetector-R3-13/ADSupport") epicsEnvSet("ADCORE","/nfs/chess/epics/det/support_flir/areaDetector-R3-13/ADCore") epicsEnvSet("AUTOSAVE","/nfs/chess/epics/det/support_flir/autosave-R5-11") epicsEnvSet("BUSY","/nfs/chess/epics/det/support_flir/busy-R1-7-4") epicsEnvSet("CALC","/nfs/chess/epics/det/support_flir/calc-R3-7-5") epicsEnvSet("SNCSEQ","/nfs/chess/epics/det/support_flir/seq-R2-2-9") epicsEnvSet("SSCAN","/nfs/chess/epics/det/support_flir/sscan-R2-11-5") epicsEnvSet("DEVIOCSTATS","/nfs/chess/epics/det/support_flir/iocStats-3-1-16") epicsEnvSet("EPICS_BASE","/nfs/chess/epics/det/base-7.0.6") epicsEnvSet("ADGENICAM","/nfs/chess/epics/det/support_flir/areaDetector-R3-13/ADGenICam") errlogInit(20000) dbLoadDatabase("/nfs/chess/epics/det/support_flir/areaDetector-R3-13/ADSpinnaker/iocs/spinnakerIOC/dbd/spinnakerApp.dbd") spinnakerApp_registerRecordDeviceDriver(pdbbase) # Use this line for a specific camera by serial number, in this case a BlackFlyS GigE epicsEnvSet("CAMERA_ID", "22671882") epicsEnvSet("GENICAM_DB_FILE", "/nfs/chess/epics/det/support_flir/areaDetector-R3-13/ADGenICam/db/FLIR_BFS_U3_161S7M.template") < st.cmd.base # Prefix for all records epicsEnvSet("PREFIX", "13SP1:") # The port name for the detector epicsEnvSet("PORT", "SP1") # Really large queue so we can stream to disk at full camera speed epicsEnvSet("QSIZE", "2000") # The maximim image width; used for row profiles in the NDPluginStats plugin epicsEnvSet("XSIZE", "2048") # The maximim image height; used for column profiles in the NDPluginStats plugin epicsEnvSet("YSIZE", "2048") # The maximum number of time series points in the NDPluginStats plugin epicsEnvSet("NCHANS", "2048") # The maximum number of frames buffered in the NDPluginCircularBuff plugin epicsEnvSet("CBUFFS", "500") # The search path for database files # This is for Windows epicsEnvSet("EPICS_DB_INCLUDE_PATH", "/nfs/chess/epics/det/support_flir/areaDetector-R3-13/ADCore/db;/nfs/chess/epics/det/support_flir/areaDetector-R3-13/ADGenICam/db;/nfs/chess/epics/det/support_flir/areaDetector-R3-13/ADSpinnaker/iocs/spinnakerIOC/../../db") # This is for Linux #epicsEnvSet("EPICS_DB_INCLUDE_PATH", "$(ADCORE)/db:$(ADGENICAM)/db:$(ADSPINNAKER)/db") # Define NELEMENTS to be enough for a 5320x3032 (color) image epicsEnvSet("NELEMENTS", "16130240") # ADSpinnakerConfig(const char *portName, const char *cameraId, int numSPBuffers, # size_t maxMemory, int priority, int stackSize) ADSpinnakerConfig("SP1", 22671882, 10, 0, 0,0) 2024/06/06 11:46:16.990 ADSpinnaker::connectCamera exception Spinnaker: Not enough available memory to allocate buffers for streaming. [-1016] 2024/06/06 11:46:16.990 ADSpinnaker:ADSpinnaker: camera connection failed (3)
Number of cameras detected: 1 Camera 0 Device Vendor Name (DeviceVendorName):FLIR Device Model Name (DeviceModelName):Blackfly S BFS-U3-161S7M Device Serial Number (DeviceSerialNumber):22671882 Device Version (DeviceVersion):2210.0.657.0 Device Type (DeviceType):USB3Vision
|