| 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 <2025> | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 <2025> |
| <== Date ==> | <== Thread ==> |
|---|
| Subject: | Keithley device reading failure |
| From: | LONG FENG via Tech-talk <tech-talk at aps.anl.gov> |
| To: | tech-talk at aps.anl.gov |
| Date: | Tue, 11 Mar 2025 19:13:50 +0800 |
Hi all,
I'm using the Keithley648x project from GitHub to read data from my Keithley 6485 device. However, I'm getting the following error messages:
2025/03/11 18:49:30.491 k648x:CA1:model devAsynOctet::readIt failed
2025/03/11 18:49:30.491 k648x:CA1:serial devAsynOctet::readIt failed
2025/03/11 18:49:30.491 k648x:CA1:digRev devAsynOctet::readIt failed
2025/03/11 18:49:30.491 k648x:CA1:dispRev devAsynOctet::readIt failed
2025/03/11 18:49:30.491 k648x:CA1:brdRev devAsynOctet::readIt failed
2025/03/11 18:49:30.491 k648x:CA1:read devAsynFloat64::processCallbackInput process read error
2025/03/11 18:49:30.491 k648x:CA1:rangeAuto devAsynInt32::processCallbackInput process read error
2025/03/11 18:49:30.491 k648x:CA1:zeroCheck devAsynInt32::processCallbackInput process read error
2025/03/11 18:49:30.491 k648x:CA1:zeroCorrect devAsynInt32::processCallbackInput process read error
2025/03/11 18:49:30.491 k648x:CA1:medianFilter devAsynInt32::processCallbackInput process read error
2025/03/11 18:49:30.491 k648x:CA1:digitalFilter devAsynInt32::processCallbackInput process read error
2025/03/11 18:49:30.491 k648x:CA1:digitalFilterControl devAsynInt32::processCallbackInput process read error
2025/03/11 18:49:30.491 k648x:CA1:medianFilterRank devAsynInt32::processCallbackInput process read error
2025/03/11 18:49:30.491 k648x:CA1:digitalFilterCount devAsynInt32::processCallbackInput process read error
2025/03/11 18:49:30.491 k648x:CA1:rate devAsynInt32::processCallbackInput process read error
2025/03/11 18:49:30.491 k648x:CA1:range devAsynInt32::processCallbackInput process read error
2025/03/11 18:49:30.491 k648x:CA1:rangeAutoUlimit devAsynInt32::processCallbackInput process read error
2025/03/11 18:49:30.491 k648x:CA1:rangeAutoLlimit devAsynInt32::processCallbackInput process read error
2025/03/11 18:49:30.491 k648x:CA1:readStatusOverflow devAsynInt32::processCallbackInput process read error
2025/03/11 18:49:30.491 k648x:CA1:readStatusFilter devAsynInt32::processCallbackInput process read error
2025/03/11 18:49:30.491 k648x:CA1:readStatusMath devAsynInt32::processCallbackInput process read error
2025/03/11 18:49:30.491 k648x:CA1:readStatusNull devAsynInt32::processCallbackInput process read error
2025/03/11 18:49:30.492 k648x:CA1:readStatusLimits devAsynInt32::processCallbackInput process read error
2025/03/11 18:49:30.492 k648x:CA1:readStatusOvervoltage devAsynInt32::processCallbackInput process read error
2025/03/11 18:49:30.492 k648x:CA1:readStatusZeroCheck devAsynInt32::processCallbackInput process read error
2025/03/11 18:49:30.492 k648x:CA1:readStatusZeroCorrect devAsynInt32::processCallbackInput process read error
2025/03/11 18:49:30.492 k648x:CA1:readStatusRaw devAsynInt32::processCallbackInput process read error
2025/03/11 18:49:30.492 k648x:CA1:readTimestamp devAsynInt32::processCallbackInput process read error
iocRun: All initialization complete
I've only modified the path definitions in configure/RELEASE. Are there any additional steps I should follow or configurations I might have missed?
Any suggestions would be greatly appreciated. Thanks!
Feng