RE: Would this motor record documentation be considered "current"

["Foster, Andrew \(-,RAL,TEC\) via Tech-talk" <tech-talk at aps.anl.gov>]

Hi Graeme,

 

I’m not familiar with that document, I always look here:

 

https://epics-modules.github.io/motor/motorRecord.html

 

Cheers, Andy

 

 

From: Tech-talk <tech-talk-bounces at aps.anl.gov> On Behalf Of Graeme Winter via Tech-talk
Sent: 29 April 2025 16:40
To: tech-talk at aps.anl.gov
Subject: Would this motor record documentation be considered "current"

 

Good morning

 

Before I start committing too much of this to memory or putting it into effect, would this be considered “current”?

 

epics-motor

PDF Document · 178 KB

 

I note it is from 2010, which may or may not be recent in EPICSland

 

Thanks and all the best Graeme

This e-mail and any attachments may contain confidential, copyright and or privileged material, and are for the use of the intended addressee only. If you are not the intended addressee or an authorised recipient of the addressee please notify us of receipt by returning the e-mail and do not use, copy, retain, distribute or disclose the information in or attached to the e-mail. Any opinions expressed within this e-mail are those of the individual and not necessarily of Diamond Light Source Ltd.
Diamond Light Source Ltd. cannot guarantee that this e-mail or any attachments are free from viruses and we cannot accept liability for any damage which you may sustain as a result of software viruses which may be transmitted in or with the message.
Diamond Light Source Limited (company no. 4375679). Registered in England and Wales with its registered office at Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom.