EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  <2025 Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  <2025
<== Date ==> <== Thread ==>

Subject: EPICS Qt 4.1.3 available [SEC=OFFICIAL]
From: "STARRITT, Andrew via Tech-talk" <tech-talk at aps.anl.gov>
To: "Tech-talk at aps.anl.gov" <Tech-talk at aps.anl.gov>
Date: Tue, 27 May 2025 05:38:53 +0000
Hi EPICS Qt users and potential new users,

The EPICS Qt 4.1.3 was recently released and is now available at GitHub:

 

The source code is available from: https://github.com/qtepics with

general guidance/documentation available at: https://qtepics.github.io and

the release notes are available here: https://qtepics.github.io/release_notes.html

 

All the repositories have been tagged r4.1.3

Please see the release notes for details and details of other improvements.

 

 

Regards

Andrew Starritt




Navigate by Date:
Prev: Enable or select records Dr. Simon Friederich via Tech-talk
Next: Fwd: Use mysy2 install eEPICSbase on windows 10 failed ewen wang via Tech-talk
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  <2025
Navigate by Thread:
Prev: Re: Enable or select records Ralph Lange via Tech-talk
Next: Fwd: Use mysy2 install eEPICSbase on windows 10 failed ewen wang via Tech-talk
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  <2025