2002 2003 2004 2005 2006 2007 <2008> 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 2002 2003 2004 2005 2006 2007 <2008> 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Re: Unresolved symbol: rtemsTicksPerSecond_double |
From: | Andrew Johnson <[email protected]> |
To: | Till Straumann <[email protected]>, "Ernest L. Williams Jr." <[email protected]> |
Cc: | EPICS core-talk <[email protected]>, [email protected], Arturo Alarcon <[email protected]>, Steve Shoaf <[email protected]> |
Date: | Fri, 02 May 2008 09:46:58 -0500 |
Till, Ernest,Does what Eric describes provide what you guys need? The EPICS rtems_netconfig.c file is really an application-specific network configuration file so in many cases you may need to have your own anyway.
- Andrew Eric Norum wrote:
There are some mechanisms already available.1) EPICS RTEMS support breaks the configuration/initialization into several source files. If, for example, your application requires some specialized network configuration, simply copy rtems_netconfig.c to the application directory, make the changes, and add rtems_netconfig.c to the application Makefile. To do this on a site-wide basis, put your site-specific version of rtems_netconfig.o into a support module where it will be linked before -lrtemsCom is encountered. There's a separate rtems_config.c file, too.2) As noted in the EPICS R3.14.10 release notes, there are some hooks to make it easier to set up your own specific configuration:Added hooks for application routines to supply special network configuration parameters. The RTEMS startup code calls epicsRtemsInitPreSetBootConfigFromNVRAM just before reading values from NVRAM and epicsRtemsInitPostSetBootConfigFromNVRAM just afterwards. See epicsRtemsInitHooks.h for prototypes and global variables.On May 1, 2008, at 4:10 PM, Andrew Johnson wrote:Till Straumann wrote:seems that 3.14.10 does a more initialization in the 'Init' function which we don't use (e.g., because it hardcodes things like the the amount of mbuf (networking buffers) space [which ends up being the same] and whether BOOTP should be used. IMHO we should come up with a better way of initializing the system that is more flexible (here we use a bootloader plus a small libraryfor connecting the bootloader, user interactive input, non-volatile memoryand the bootee). For the time being, IMHO 'Init' should be broken up into pieces that a) deal with initializing RTEMS (networking, filesystem, console) b) deal with initializing EPICS (setting some environment variables, rtemsTicksPerSecond_double etc.)The user should be able to override all of (a) but use (b) to initializeEPICS on an RTEMS system of her preference.That seems entirely reasonable, can you work with Eric to come up with a proposal and patch that works for both camps? R3.14.10 is not set in stone yet, and it would be good to get this cleared up before the release.- Andrew
-- When a distinguished but elderly scientist states that something is possible, he is almost certainly right. When he states that something is impossible, he is very probably wrong. -- Arthur C. Clarke