2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 <2020> 2021 2022 2023 2024 | Index | 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 <2020> 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Re: EPICS 7 and VxWorks 6.9 for PPC604? |
From: | "Johnson, Andrew N. via Core-talk" <core-talk at aps.anl.gov> |
To: | Dirk Zimoch <dirk.zimoch at psi.ch> |
Cc: | EPICS core-talk <core-talk at aps.anl.gov> |
Date: | Wed, 3 Jun 2020 17:09:31 +0000 |
Hi Dirk,
Are you also building for the generic vxWorks-ppc32 and -ppc32sf targets? We use that now on all our PowerPC boards instead of the CPU-specific targets, so I haven’t built the other vxWorks-ppc* targets for quite a few years now. I would recommend
that you do the same if you can, we run mv2100, mv2700, mv5100 and mv6100 boards on -ppc32 and mv3100 boards on the -ppc32sf target.
- Andrew
--
Complexity comes for free, simplicity you have to work for.
|