Experimental Physics and Industrial Control System
Subject: |
MV167s and the 712M module |
From: |
Carl Dickey <[email protected]> |
Date: |
Fri, 22 Apr 1994 13:14:59 -0400 |
I'm not familiar with the Heurikon enclosure, but with our Schroff
enclosures there is enough room to bring the cables up through the
bottom between the guide rails of slot 1 and slot 2. This has been
working well for us and the cables don't seem to get in the way.
But a better solution is to use the Tracewell crates that Bob recommended
to us in the past. These crates have rear panel positions for the 712M.
This also frees up that valuable front panel space for items other than
the 712M. We are very happy with our Tracewell crates thus far.
Best regards to all,
carl
- Navigate by Date:
- Prev:
MV167s and the 712M module mcgehee
- Next:
RE: MV167s and the 712M module Bill McDowell
- Index:
<1994>
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
MV167s and the 712M module mcgehee
- Next:
RE: MV167s and the 712M module Bill McDowell
- Index:
<1994>
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024