Experimental Physics and Industrial Control System
One of the new PEP-II subsystems here at SLAC uses both DM and MEDM
displays. This system is now coming into use, since there is stored
beam in PEP-II for commissioning, and a problemette has arisen.
The MEDM "Print" output makes the postscript printers unhappy. I am
unable to find information on where the temporary file is and/or how
to not have the file deleted. Also, I'm guessing that PSPRINTER
and/or PS_PRINTER serve to direct the printout here or there.
Does someone have some insight? The MEDM we're using is the
statically linked version from Argonne.
/Ron Chestnut
- Navigate by Date:
- Prev:
[Fwd: EPICS: Error in db/callback.c] Marty Kraimer
- Next:
Statically Built MEDM and GDCT for HPUX9.05? Dave Reid
- Index:
1994
1995
1996
<1997>
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
[Fwd: EPICS: Error in db/callback.c] Marty Kraimer
- Next:
MEDM Print Ken Evans
- Index:
1994
1995
1996
<1997>
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024