Hello....
I've just been told that most folks are using
statically built versions of MEDM and GDCT. However,
on the Software Distribution page, they are not
available for HPUX.
Is there someone out there using HPUX9.05 that
could make these extensions available via FTP?
Thanks in advance...
dave
-----------------------------------------------------------
Dave Reid [email protected]
UW Medical Center (206)548-4536
Radiation Oncology Dept.
Seattle, WA
- Replies:
- Re: Statically Built MEDM and GDCT for HPUX9.05? Ralph Lange
- Navigate by Date:
- Prev:
MEDM Print Ron Chestnut
- Next:
EPICS 3.13 application software distribution Tim Mooney
- Index:
1994
1995
1996
<1997>
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
MEDM Print Ken Evans
- Next:
Re: Statically Built MEDM and GDCT for HPUX9.05? Ralph Lange
- Index:
1994
1995
1996
<1997>
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|